Our hours are
You can contact us
@ 229-560-6066 or
We look forward to hearing from you!
Emails are answered as soon as possible even on weekends and holidays.
PayPal is our accepted form of payment.
Most orders are filled and shipped in one-three business days.
For 1/2 inch buttons: 1.5 inch diameter
For 7/8 inch buttons: 1.75 inch diameter
For 1 1/8 inch buttons: 2 inch diameter
For 1 inch buttons: 2.25 inch diameter
Step 2: When using a printed ribbon, make sure that the print side will be covering the outside of your button. (Fig 2)
Step 3: Center your button on the back side of the ribbon/fabric. (Fig 3)
When using a thin fabric, you may want to use a piece of lining fabric to prevent the shiny button shell from showing through the fabric after button has been assembled.
If it seems to be extremely difficult to (snap) the button back into the button shell, you may want to trim some of the excess fabric from around the shell (while pushed down in the mold). Sometimes, too much fabric inside the button shell can make it almost impossible to snap the back in place.